A second folder for sumps, rain heads and boxes, so the long folder keeps running
A lower-cost second folder for the flashing accessories, sold, installed and serviced by Total Rollforming, CIDAN’s dealer in Australia and New Zealand.
We are hearing from a lot of shops on 8m folders who want a cheaper machine for sumps, rain heads and other flashing accessories, so the long folder is not pulled off the bread and butter work for a one-off. That is the job the CIDAN FX does. It is a CNC panbrake folder in three lengths from 2.6m to 4.1m, with a rotating upper beam that carries straight and segmented tooling at the same time, and a touchscreen that takes a DXF and works out the fold sequence.
Small work off the long folder
The small pieces come off the FX and the long folder keeps running. Sumps, rain heads, saddles, hoods, stop ends, the odd tray: the parts that interrupt an 8m machine for ten minutes at a time and never pay for the interruption.
Boxes and trays, repeatable
Four-sided work folds on the FX. The rotating upper beam carries a straight rail on one side and segmented tooling on the other, and switches between them in seconds without anyone lifting a tool. The high divided tooling option, 125mm tool height, is made for complex boxes. Draw the box on the screen or load the DXF and the control sets the sequence and the backgauge, so the twentieth one matches the first.
Three lengths, one machine
| Model | Working length | Steel | Stainless | Aluminium |
|---|---|---|---|---|
| FX26 | 2.6m | 2.5mm | 1.6mm | 3.7mm |
| FX32 | 3.2m | 2.0mm | 1.2mm | 3.0mm |
| FX41 | 4.1m | 2.0mm | 1.2mm | 3.0mm |
Steel capacities are mild steel at 400 N/mm². Every model ships with the nuLINK 21.5 inch touchscreen control: draw the part or import a DXF, and it works out the folding sequence. The control simulates the bending sequence before the first fold. Clamping beam opening 150mm. Adjustable crowning. Standard with the BASIC backgauge and spring steel fingers, 125mm high divided tooling, manual XTAP for tapered folds and table pans.
If you are comparing it with an NC panbrake
A hydraulic NC panbrake will fold thicker stock than the FX on paper, and for a jobbing shop on plate that matters. Flashing and accessory work is 0.55mm to 1.2mm, and there the question is not capacity, it is how long the set-up takes and whether the tenth part matches the first.
On the FX the backgauge is programmed, the sequence is worked out from the drawing, the segmented tooling is already on the beam, and the control shows you the part before you fold it. That is the difference between a machine the long folder operator can jump on between runs and one that needs its own operator and a set-up sheet.
Can your people run it
Yes. Here is the control, on film, from login to a finished part. These are CIDAN’s own training clips, embedded from their channel.
nuLINK control: Login and Home Menu
nuLINK: Draw and Program a Part
nuLink Software in Action: Creating a Box with FX32
nuLINK: Program and Bend a Tapered Box Gutter on CIDAN FX (XSPACE)
Installation includes operator training on your floor, and the control’s remote access means CIDAN’s support team can see what you see if something needs a second pair of eyes.
11-week build time
Build time on an FX is 11 weeks from order. Lance can walk you through what happens between the order and the machine arriving on your floor.
Installed and serviced here
Total Rollforming installs the machine, commissions it, trains your operators and services it afterwards, from Bowral in New South Wales and East Tamaki in Auckland. We have CIDAN machines running in shops across both countries. If you want to see one folding before you decide, tell us where you are.
Questions we get asked
How long until it is on the floor?
Build time is 11 weeks from order. Shipping from Europe and installation are scheduled after that, and Lance will give you the current picture when you talk.
What thickness does it fold?
Up to 2.5mm mild steel on the 2.6m model and 2.0mm on the 3.2m and 4.1m models. Stainless to 1.6mm and 1.2mm, aluminium to 3.7mm and 3.0mm. The full table is above.
Can it make boxes and trays?
Yes. The rotating upper beam carries segmented tooling, and the high divided tooling option at 125mm tool height is made for complex boxes. Draw the box in 3D on the nuLINK screen and the control suggests the bending sequence before you fold.
What control does it come with?
nuLINK, a 21.5 inch touchscreen. Draw the part on screen or import a DXF and it works out the folding sequence and sets the backgauge. It is the only control CIDAN now ships on the FX.
How long does it take to learn?
The user interface is very intuitive. On a Queensland install, after just an hour of Lance demonstrating the control functions, the team were into folding some 4-sided, 1.2mm stainless trays that had previously been done manually.
Do you install and service in New Zealand?
Yes. Total Rollforming has an office and technicians in East Tamaki, Auckland, as well as Bowral in New South Wales. Installation, commissioning, operator training and ongoing service are done by our own people in both countries.
Is a CNC panbrake folder the same thing as the FX?
Close enough that the market uses the term. A panbrake (also called a pan brake or box and pan folder) is a folder with segmented fingers for boxes and pans. The FX is that, with a programmed backgauge, DXF import, automatic sequencing and a rotating beam that carries both tooling sets at once.
Is there a warranty?
Yes. The CIDAN FX carries a 12-month manufacturer warranty on parts and workmanship, with service from our own technicians in Australia and New Zealand.
“Machine’s great, I don’t know how we ever lived without it.”
“After operating a FX32 in their Brisbane branch for a couple of years, the decision to add one to their custom sheetmetal shop in the Gold Coast was a pretty easy decision. The versatility of this machine can’t be underestimated. The user interface is very intuitive and after just an hour of me demonstrating the control functions, the team were into folding some 4-sided, 1.2mm stainless trays that had previously been done manually. The time saving was instant, and as I left the team they looked excited to see what else the FX could do!”
Get a price for your shop
Pricing depends on length, control options and tooling. Tell us what you fold, your longest piece and roughly how many a week, and Lance will send you a number.
Rather talk it through?Book 15 minutes with Lance, or message us on WhatsApp and we will reply within the hour in business hours.


